Bed front wall

Moderator: FORDification

Post Reply
rdaniel911
New Member
New Member
Posts: 152
Joined: Mon Apr 28, 2008 10:58 am
Location: DeFuniak Springs, FL

Bed front wall

Post by rdaniel911 »

Does anyone know who may carry the replacement panel for the front panel on a 68 F100 styleside box. I can find them for the flare sides but not the stylesides.
Robert & Linda
2011 F-150 Supercab
2017 Ford Edge
1969 Mustang Fastback
1968 F-100
http://s297.photobucket.com/albums/mm21 ... 8%20f-100/
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Bed front wall

Post by basketcase0302 »

Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
convincor
100% FORDified!
100% FORDified!
Posts: 1511
Joined: Wed Sep 12, 2007 5:05 am
Location: Connecticut

Re: Bed front wall

Post by convincor »

I actually have one that's mint if your still looking.
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
rdaniel911
New Member
New Member
Posts: 152
Joined: Mon Apr 28, 2008 10:58 am
Location: DeFuniak Springs, FL

Re: Bed front wall

Post by rdaniel911 »

I am, all the beds down here i've looked at are all rusted across the front bottom, and the only repop parts I can find are for flaresides not stylesides.
Robert & Linda
2011 F-150 Supercab
2017 Ford Edge
1969 Mustang Fastback
1968 F-100
http://s297.photobucket.com/albums/mm21 ... 8%20f-100/
User avatar
convincor
100% FORDified!
100% FORDified!
Posts: 1511
Joined: Wed Sep 12, 2007 5:05 am
Location: Connecticut

Re: Bed front wall

Post by convincor »

The truck this came from had a cap on it all its life... so it was well protected. Not to mention it was only used to pull a camper during summer months.. but bed still had the side seams rot out.
ill shoot a couple pics for you.
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
User avatar
convincor
100% FORDified!
100% FORDified!
Posts: 1511
Joined: Wed Sep 12, 2007 5:05 am
Location: Connecticut

Re: Bed front wall

Post by convincor »

Pics here.
http://s101.photobucket.com/albums/m41/ ... or%20sale/

If you want it let me know. I've got a spot weld cutter and will sererate the parts leaving you the part without the holes.
I plan on using this bed floor and wheel wells for my truck as mine are rough.. But the other wall I have is good.
How's $75+shipping sound. Let me know.
Scott
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
Post Reply