inner fender question
Moderator: FORDification
-
HELKENN
- New Member
- Posts: 11
- Joined: Wed Jan 18, 2012 7:50 pm
inner fender question
i was finishing up the wiring in my engine compartment and i was wonder what this hole was for? i put a piece of tape over the back of it so you guys could see it better
-
forrestbump
- 100% FORDified!
- Posts: 2140
- Joined: Tue Aug 10, 2010 12:23 am
- Location: California, Phelan
Re: inner fender question
No idea what it's for. I just looked at both of my unmolested '70 F250 2WD trucks and sure enough, they both have that same hole.
1970, 2WD, F-250, C/S, Dual Tanks, 390 FE (of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Sky View Blue, Ranger XLT
1970, 2WD, F-250, C/S, A/C, Dual Tanks, 390 FE (again, of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Wimbledon White & Sky View Blue, Ranger (almost twin brothers!)
"One of the greatest discoveries a man makes, one of his great surprises, is to find he can do what he was afraid he couldn't do" - Henry Ford
Larry
1970, 2WD, F-250, C/S, A/C, Dual Tanks, 390 FE (again, of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Wimbledon White & Sky View Blue, Ranger (almost twin brothers!)
"One of the greatest discoveries a man makes, one of his great surprises, is to find he can do what he was afraid he couldn't do" - Henry Ford
Larry
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: inner fender question
Three different pictures of that area for the 358 mile truck. Go figure...just out of the picture in all three.
I'm saying it's for the grommet-for the flux capacitor wiring.
I'm saying it's for the grommet-for the flux capacitor wiring.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
forrestbump
- 100% FORDified!
- Posts: 2140
- Joined: Tue Aug 10, 2010 12:23 am
- Location: California, Phelan
Re: inner fender question
...ya know Jeff, I heard a large thud, like something fell off, while I was driving my truck. I just shrugged and kept on driving...it must've been my Flux Capacitor!?!?basketcase0302 wrote:I'm saying it's for the grommet-for the flux capacitor wiring.
My performance just hasn't been the same since my Flux Capacitor parted company with my truck...well at least that mystery has been solved!
Thanks
1970, 2WD, F-250, C/S, Dual Tanks, 390 FE (of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Sky View Blue, Ranger XLT
1970, 2WD, F-250, C/S, A/C, Dual Tanks, 390 FE (again, of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Wimbledon White & Sky View Blue, Ranger (almost twin brothers!)
"One of the greatest discoveries a man makes, one of his great surprises, is to find he can do what he was afraid he couldn't do" - Henry Ford
Larry
1970, 2WD, F-250, C/S, A/C, Dual Tanks, 390 FE (again, of course), C6, Power Steering, Power Disc Brakes, Dana 60 3.73, Wimbledon White & Sky View Blue, Ranger (almost twin brothers!)
"One of the greatest discoveries a man makes, one of his great surprises, is to find he can do what he was afraid he couldn't do" - Henry Ford
Larry
-
elgemcdlf
- 100% FORDified!
- Posts: 1855
- Joined: Mon Nov 01, 2010 2:04 pm
- Location: Ringgold, GA
Re: inner fender question
I was always told it was lightening up the front end for race applications. If you drill enough of them you can get the weight of the inner fender down to almost nothing. I must have a newer model truck. My Flux Capacitor is inside the cab under the seat. Maybe they had problems with water being mounted outside in the elements.