Finding Body Parts

[69dakotaford]

I am new to this site. I recently bought a 69 f100. The truck is in relatively good shape. It's all original with the 360 & a T-18 4speed. I'm planning to drive it for a few years, then do a frame-off resto. I've taken the rubber mat out and used POR-15 on the floor which had some rust---nothing all the way through. I have noticed that both rear cab corners have some rust between the cab and the box--all the way through. I found that the inside of these corners has scaly rust fairly bad. The only other major spot of rust through is the passenger fender--below the battery of course.

My questions: When I restore the old girl, how do I find replacement sheet metal--besides a salvage yard? Can you find the entire back cab anywhere? I could probably get creative with some bondo, but I'd really like to have metal welded in.

I attached a pic of the pickup as well as the spot of rust through on the passenger side back of cab.
Any response is appreciated!

[billbates40]

LMC (Long Motor Corporation) has about any part you can think of, get yourself a free magazine.
http://www.lmctruck.com/ford/

Post on here any parts you may be looking for, a lot of these guys have donor trucks sitting out back.

[basketcase0302]

http://www.rustrepair.com/floor_pan.htm

[elgemcdlf]

http://www.fordification.com/forum/view ... 22&t=61369

Parts from NV

[69dakotaford]

Great info from you both. I appreciate it!

[BobbyFord]

I bought my cab corners and inner fender well from Dennis Carpenter. Well made quality products.