I purchased this truck new in 1978. Just recently, the door latches started making a "Double Click" when opening the doors. They both started doing this within a couple of weeks of each other. The door, when closed isn't "Tight" like it was before.
Any ideas what my problem could be? I have pulled the drivers side lock and all the springs look intack. It works but released one half of the latch before the other.
Thanks
Tim
1978 Ford Truck Door Latches
Moderator: FORDification
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 1978 Ford Truck Door Latches
Tim,
You might also want to post over on our "sister site" for the dent era trucks:
http://www.fordification.net/index.htm
But I can tell you from my expierence with the three dents I owned it will usually be the door strike, (the part that screws into the cab itself). Both DC and NPD sell them cheaply and another "quick fix" is to wrap a few wraps of electrical tape around it. This will tighten the clearance-and hold the door closed better.
You might also want to post over on our "sister site" for the dent era trucks:
http://www.fordification.net/index.htm
But I can tell you from my expierence with the three dents I owned it will usually be the door strike, (the part that screws into the cab itself). Both DC and NPD sell them cheaply and another "quick fix" is to wrap a few wraps of electrical tape around it. This will tighten the clearance-and hold the door closed better.

Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4