Bed Floor Patch Panel

[Swegner99]

I have been looking thru all the catalogs of the usual suspects (LMC, DC, etc) and havent come across the panel I am looking for.

I need a piece of the bed floor, about 24" from the bulkhead towards the back of the bed and the entire width of the bed floor. I havent found anyone with these dimensions. Anyone have any leads on finding this? Junkyard is not an option because havent found one in my area with any good bump beds.

Thanks in advance guys

[davbell22602]

I need replacement bed floor panels for a 8ft bed. Let me know what you find out.

[Swegner99]

I need replacement bed floor panels for a 8ft bed. Let me know what you find out.

I will, I also have the 8ft bed, so im hoping someone will chime in here with some good advice

[davbell22602]

I need replacement bed floor panels for a 8ft bed. Let me know what you find out.

I will, I also have the 8ft bed, so im hoping someone will chime in here with some good advice

NPD has replacement bed floor panels, wheel covers, outer bed quarter panels, and tailgate post panels. Same with LMC, Mac, also.

[Swegner99]

I need replacement bed floor panels for a 8ft bed. Let me know what you find out.

I will, I also have the 8ft bed, so im hoping someone will chime in here with some good advice

NPD has replacement bed floor panels, wheel covers, outer bed quarter panels, and tailgate post panels. Same with LMC, Mac, also.

Yes they do, but the panels are only 16" wide and 48 " long, I need it to be a lot wider and a lot shorter so the ribs in the bed floor will line up correctly. I could probably order 2, but trying to see what else is out there

[davbell22602]

Ok

[72BahamaBlue]

Back in '97, I bought a "replacement" bed panel, wasn't even close to the shape of my bump's bed floor, was also much thinner. Ended up in the recycle bin. Donor metal is sure to work. A panel that wide could taken from a donor, cut in two pieces for shipping. You might try putting an ad in the parts wanted section.