bumps with lowered altitude!! (lots of great custom bumps!!)

[BobbyFord]

Yes Sir. 10" steelies with 325mm drag radials
[ Image ]

Mini-tubbed the bed 3-1/2" inches (with 2" to spare)....> http://www.fordification.com/forum/view ... =7&t=58890 . Backspacing is 5".

Bobby what does your truck turn in the 1/4? Don't tell me those street slicks are all for looks.

I have not been to the track yet. When I do I will probably change gearing, I currently have 3.50's in it but I have a spare Strange carrier that I'm going to set up with a 3.70 or 3.91 gear. I'm curious myself.

[tybob81]

An old pic of my green 68 in the shop

[quantumleap]

Yes Sir. 10" steelies with 325mm drag radials
[ Image ]

I have not been to the track yet. When I do I will probably change gearing, I currently have 3.50's in it but I have a spare Strange carrier that I'm going to set up with a 3.70 or 3.91 gear. I'm curious myself.

your gonna swap your 3.50 trac lock? a whole new rear end or just the pumpkin gears?

[BobbyFord]

your gonna swap your 3.50 trac lock? a whole new rear end or just the pumpkin gears?

I'm going to set up a Strange nodular case with a shorter set of gears so that I can swap back and forth from 3:50 to 3:91.

[quantumleap]

sounds pretty cool man

[CrypticRacer13]

Bobby do you have any full truck shots? I always see just a peak of the beast an i likey.

[BobbyFord]

Bobby do you have any full truck shots? I always see just a peak of the beast an i likey.

It's pretty ugly, I still don't have a hood on it yet. I have three hoods and I want to modify 1 or 2 of them with hood scoops or cut two up to make a raised cowl hood. I just haven't had the time to commit to something like that right now. The bed is a brown replacement bed from when I got rear-ended. It's got a long way to go...

[elgemcdlf]

Bobby do you have any full truck shots? I always see just a peak of the beast an i likey.

It's pretty ugly, I still don't have a hood on it yet. I have three hoods and I want to modify 1 or 2 of them with hood scoops or cut two up to make a raised cowl hood. I just haven't had the time to commit to something like that right now. The bed is a brown replacement bed from when I got rear-ended. It's got a long way to go...

Great minds think alike! I have already cut my second hood for the raised cowl induction. I am doing 3/4". Real subtle factory looking with all the factory lines.

[elgemcdlf]

A couple updated pics with the IRS installed. For an idea of scale I am 5'11" and the driprail is even with my throat.

[F100builder]

Looking great!

[68 Silver Bullet]

This is my 68 that im building its got an 06 Crown Vic front end and a 98 Explorer rear end and Chrysler 300 wheels. I plan on 4 linking the back with coilovers and putting coilovers in the front.

[elgemcdlf]

This is my 68 that im building its got an 06 Crown Vic front end and a 98 Explorer rear end and Chrysler 300 wheels. I plan on 4 linking the back with coilovers and putting coilovers in the front.

The CV IFS already has coil overs.

[68 Silver Bullet]

The CV IFS already has coil overs.[/quote]

No they come with just normal struts. But ive found some coilovers for this front suspension. They're a little spendy but the biggest drop springs i can find are 1.5"

[basshound71]

...Don't you have some blue steelies too Bobby?

Yes Sir. 10" steelies with 325mm drag radials

did you have to cut on the bed to get those tires to fit? whats the backspace on them?

Me likey!!!!!

[basshound71]

anybody running fe's with their crown vic i.f.suspension? if so any pics of the motor mounts used?

Here is mine, the 360FE is the only original part of the drive train left, there are some pics of the mounts I fabbed up in my project thread...

ditto