Rusted out holes on Frame

davbell22602 · Post by **davbell22602** » Sun Sep 11, 2011 3:42 pm

Does anybody know what hole diameter is supposed on the frame for the radiator support mounts?

tylerb43 · Post by **tylerb43** » Mon Sep 12, 2011 12:25 pm

davbell22602 wrote:Does anybody know what hole diameter is supposed on the frame for the radiator support mounts?

From this thread, one guys says 1.25" and one guy says 1.375". If that's not good enough for you, I'll measure mine when I get home tonight, my frame is stripped at the moment with no rust at the radiator support holes. I do however need to try the washer splice trick for my front cab mounts as they are in poor shape.

http://fordification.com/forum/viewtopi ... =7&t=45060

davbell22602 · Post by **davbell22602** » Mon Sep 12, 2011 4:36 pm

I need the exact the size. I found a welder that will refab mine with 12 gauge steel for $100 at my house from his service truck.

tylerb43 · Post by **tylerb43** » Mon Sep 12, 2011 5:02 pm

Hey, just measured mine, and they are 1 3/8" (1.375) diameter. And the frame thickness is .135", which is 10 gauge in sheet metal. FYI. Hope that helps.
-Tyler

davbell22602 · Post by **davbell22602** » Mon Sep 12, 2011 6:50 pm

tylerb43 wrote:Hey, just measured mine, and they are 1 3/8" (1.375) diameter. And the frame thickness is .135", which is 10 gauge in sheet metal. FYI. Hope that helps.
-Tyler

Is yours a F100 frame?

tylerb43 · Post by **tylerb43** » Mon Sep 12, 2011 7:02 pm

Yep, 69 F100 2wd.

davbell22602 · Post by **davbell22602** » Mon Sep 12, 2011 8:18 pm

tylerb43 wrote:Yep, 69 F100 2wd.

Ok, Mine is 67 F100 2wd.

The FORDification.com Forums

Rusted out holes on Frame

Re: Rusted out holes on Frame

Re: Rusted out holes on Frame

Re: Rusted out holes on Frame

Re: Rusted out holes on Frame

Re: Rusted out holes on Frame

Re: Rusted out holes on Frame

Re: Rusted out holes on Frame