should i save these ?

fordman · Post by **fordman** » Mon May 09, 2011 1:29 pm

i have two beds. that have really bad floors in them. one is on my 4wd. i really dotn plan on saving anythign from that bed at all. it can stay there and continue to rot. if i didnt need the money. but then i would need a bed to hual wood with. ok. well i guess that isnt a matter to worry about.

the second bed. has a bad floor but the sides are still pretty good. atleast the passneger side is. the drivers side has a good outside skin. but when removing the floor should i save the floor crossmembers for anything? i dont really need them. the rear one is bad. so its gone. but the two center ones. i dont need. do i scrap or keep them for someone else who may need them later on? are those crossmembers or any of the crossmembers the same as a flareside bed?

Mancar1 · Post by **Mancar1** » Tue May 10, 2011 8:44 pm

If I needed the $$, I would scrap em. Ya do what ya need 2 do. Then again keep something to haul the wood with. Winter comes back around 2 darn fast.

fordman · Post by **fordman** » Tue May 10, 2011 11:40 pm

i got the rear three out today. and i didnt even have to damage them to get them out. i then decided. i didnt want to mess with saving them. i threw them in the truck filled with scrap.

ScreaminZ · Post by **ScreaminZ** » Wed May 11, 2011 7:53 am

fordman wrote:i got the rear three out today. and i didnt even have to damage them to get them out. i then decided. i didnt want to mess with saving them. i threw them in the truck filled with scrap.

If you haven't already scrapped the beds, I'm still needing two stake pockets. I just need the supports that are welded inside the bed as two of mine are missing.

fordman · Post by **fordman** » Wed May 11, 2011 5:36 pm

which side of the bed? these have square holes in them. it was a 70 bed. now it is in pieces. all that i saved was the sides and the front part. i heard those are hard to find a good one. it was in pretty good shape so i saved it too.

sargentrs · Post by **sargentrs** » Wed May 11, 2011 6:07 pm

I posted what I need in the Parts Wanted. Subject: Bed pieces - front bottom. Take a look please. Thanks!

ScreaminZ · Post by **ScreaminZ** » Wed May 11, 2011 6:45 pm

fordman wrote:which side of the bed? these have square holes in them. it was a 70 bed. now it is in pieces. all that i saved was the sides and the front part. i heard those are hard to find a good one. it was in pretty good shape so i saved it too.

Square holes are perfect. I need one from each side. It's the front two that I need if it matters.

justiz00 · Post by **justiz00** » Tue Sep 20, 2011 6:35 pm

Were the short or long beds? Do you have the steps and brackets for them?

Justice

smokey3215 · Post by **smokey3215** » Tue Sep 20, 2011 8:14 pm

like they said i need a front support and i think the second one from the back those are not repoped so if no one else takes them i will buy them from you.

fordman · Post by **fordman** » Tue Sep 20, 2011 9:57 pm

these are styleside longbeds. please show me the exact parts requested. no steps or brackets. what rear and front supports? for the fender?

The FORDification.com Forums

should i save these ?

should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?

Re: should i save these ?